Best Chimney Sweep Minneapolis Near Me

4worldlovers: We are a family owned and operated chimney service company with over 35 years of in the field experience, no techs or subs.


We believe that beyond cleaning, education is the number one thing we can give our customers. We wish to leave you with the knowledge on proper burning practices and the right setup to have problem free, clean burning fires. We don’t go to any job to use the NFPA211 Or IRC codes to sell liners. If you want a honest inspection and suggestions to improve your fireplace performance give us a call!


Check us out on Yelp, Angie’s list and Next Door!

A: It is recommended to have your fireplace inspected annually. Although we have found under the proper conditions and setup you can burn approximately 2 cords of wood between cleanings.

A: The main function of the fireplace flue is to exhaust the products of combustion to the outside atmosphere. Restricting the exhaust of smoke with a cap allows the smoke to condense into creosote easier and causes unsafe conditions. Durring heavy rain falls the smoke shelf will absorb most of the water and whatever water goes into the firebox will be absorbed by the bricks and mortar and evaporate.

A: What you’ll need is, Simple green, towels, a bucket of water, and a tire brush. Lay down towels infront of the fireplace to catch water, spray Simple Green full strength onto the bricks then scrub gently with the tire brush. It may take a few times to get it completly clean.

There are 3 main parts of the chimney, The base, the firebox, and the Flue.

The base of the chimney is built to support the weight of the structure.

The flue is designed to exhaust the products of combustion to the outside atmosphere.

The 4” concrete slab hearth started in the 1940s. Houses constructed pre 1940s are generally built out of solid brick and mortar. In the image of the flue orientation the brick divider or wythe wasnt used durring the 1930s or older houses with tile liners.

A: Safety lies solely on the home owner and the operation of the fireplace. There is no product or add-on that can remove responsibility from the home owner.

A: We prefer hearth screens for many reasons. Besides being able to tend and enjoy the fire it allows for proper air dilution to help keep the fireplace at an acceptable operating temperature.

A: There are many reasons for fireplaces to smoke up. The best way to solve the issue is to give us a call and answer a few questions and hire us to inspect and evaluate the fireplace.

This is a subject we get asked about daily and is a touchy subject because many Chimney Techs have given up on service in exchange for larger jobs. Your best bet is research and education. As with a lot of things in life, sometimes the lower price ends up having the highest cost. If you’re left with a large bid and zero information on your fireplace beyond needing costly repairs, maybe question what you’ve been told.

Pros: If properly installed they heat up quickly to promote draft. Lifetime warranty. usually able to survive multiple chimney fires.

Cons: They’re rarely installed correctly due to chimney chase size restrictions and chase construction. They promote higher flue temperatures. you have to have a cap which increases creosote accumulation and your original damper is usually carelessly removed and you’re left with one option, a top mounted damper with cap. The liner requires annual inspections to maintain warranty whether you use it or not.

Pros: Terra cotta has a very high thermal mass and takes a long time to gain and lose heat which makes it ideal in fluctuating fire temperatures. It’s vitrified clay which seals the surfaces and helps the smoke move and give it less to build up on. No requirements for caps or screens.

Cons: Terra Cotta is susceptibile to thermal shock from chimney fires. They‘re not a good liner for modern high efficiency gas appliances that exhaust cooler water vapor.

In the end it’s up to you on which would be best for your fireplace and what you’re willing to spend on it. If you know how to burn clean manageable fires terra cotta liners will last a lifetime.

4worldlovers: Since our inception in 1977, Jack Pixley Sweeps, Inc. has been providing quality, trustworthy chimney and masonry services to Minneapolis, Saint Paul, and beyond. We are located in Spring Lake Park, Minnesota, and work hard to keep our neighbors’ homes safe, warm, and efficient.


At Jack Pixley Sweeps we know that education paired with experience is the key to quality, which is why we invest in the education of every one of our employees. All of our technicians are CSIA (Chimney Safety Institute of America) certified and take 48 CEU’s every three years. We also have biannual safety trainings and keep up on all of the latest technology, techniques and safety codes through our affiliation with the NCSG (National Chimney Sweep Guild), the NFPA (National Fire Protection Association), the CSIA (Chimney Safety Institute of America), the Brick Industry Association and the Builder’s Association of Minnesota. With Jack Pixley Sweeps on the job, you can be confident that you’re working with some of the most knowledgeable sweeps in the industry.


For 44 years, we’ve been providing comprehensive chimney and masonry care to the greater Minneapolis area – and with over 100,000 satisfied customers, we’re confident that we’ll exceed your expectations. Whether you need to schedule your annual sweep and inspection or you’ve got a serious structural hazard on your hands, Jack Pixley Sweeps can help! We specialize in all things chimney and have the tools, techniques and expertise you’ve been looking for!

When having your chimney and fireplace swept and/or inspected, you can expect the highest level of service. At Jack Pixley Sweeps, we’re passionate about what we do and take pleasure in helping our neighbors. Our technicians will always greet you with a smile and discuss your goals and problems before beginning any work. We’ll also explain how our cleaning system works and how we prevent dust from spreading to your home, and answer any questions you may have before we begin. Once we’ve consulted with you and explained the process, we’ll put down protective sheets in the 5 foot area surrounding your chimney and fireplace. At this point, we’ll do a basic inspection of the firebox, damper and smoke shelf, before bringing in the rest of the tools needed for the process. If we are able to (safely), we’ll inspect the part of your chimney that exits through the roof. Once on the roof, we’ll evaluate the condition of your chimney’s flue, brick, mortar joints and flashing. We may also attach a top vacuum to assist in dust prevention. If we notice that you need any minor repairs (such as a new chimney screen or chimney cap), we’ll offer to take care of these issues on the spot (unless you need to special order a specific part). Once the flue liner, smoke chamber and smoke shelf have been meticulously cleaned, our technicians will ask that you be present for the remaining part of the process.

At this point, we will perform a Chim-Scan inspection (using a Chim-Scan chimney camera), which will allow us to get a detailed look at the interior of your chimney. We ask that you be present so that we can explain to you what we see, as we see it, and discuss the condition and recommended repairs with you. The Chim-Scan camera allows us to take pictures of any problem areas (i.e. cracks, voids, improper construction) so that you have solid proof of your chimney’s condition and needs. These pictures will be sent to you (typically within a week of your appointment), in addition to a proposal, so that you have all of the information you need to make an informed decision regarding repairs and future fireplace and chimney use. We know that the options can sometimes be overwhelming, but we’re here to answer any questions you may have. You can count on us to be honest and forthright about your chimney’s safety and condition – we will never pressure you to make unnecessary repairs.

Jack Pixley Sweeps, Inc. is located in Spring Lake Park, Minnesota, and provides services to the greater Twin City area. We travel as far east as Bayport, as far west as Chaska and Minnestrista, as far north as Cambridge, and as far south as Apple Valley. For a complete list of cities, towns, and zip codes within our service area, click here!

4worldlovers:
For over 52 years Mohler Chimney Repair has specialized in repairing and restoring brick, stone and stucco chimneys throughout Minneapolis, St.Paul and the surrounding suburbs.

Quality craftsmanship is ensured by Mohler Chimney Repairs employees, all of whom individually have 15 to 30 years of experience in the chimney, masonry restoration and rebuild trade.

We specialize in repairing and/or replacing brick, stone and stucco chimneys.


We also provide (at our discretion) repairing and/or replacing brick, stone buttresses, planters, light posts, mailbox stands, patio border walls, window sill stones, and more. We also offer brick and stone waterproofing services.


As we specialize in chimney restoration, large scale tuckpointing of commercial buildings or on exterior residential walls is not a service we provide. However, minor tuckpointing services (at our discretion) on select areas of a residence can be provided in conjunction with any chimney restoration work being done.

Note: If you are wondering if we can be of assistance in relation to a needed masonry repair item not listed above, please call our office or message us through the contact box below and we will let you know if we can be of assistance.

(all needed stucco and concrete work is handled separate of our work by a licensed contractor who specializes in concrete or stucco).

• We do not install gas inserts or stainless-steel wood burning liner inserts.

We do however have great working relationships with reputable licensed contractors that provide services in all of the above listed areas, and will happily provide you a referral for any service you are seeking that we do not provide.

Started in 1970, Mohler Chimney Repair entered into the Twin Cities communities with the goal of providing its customers the highest quality brick, stone and stucco chimney restoration services. Fast forward five decades and the name Mohler Chimney Repair is recognized throughout the Twin Cities communities as the premier chimney repair and rebuild company with a foundation built on exceptional quality and durability.

At Mohler Chimney Repair, we want all of our customers to know that they made the right choice

When selecting Mohler Chimney Repair, you will be receiving a team of our employees with the highest skill sets in masonry restoration. Our employees have worked together in teams of 2 to upwards of 5 for a minimum of twelve years. This means when selecting us to work on your home or business, you will be receiving a team that has a lot of experience working together which in turn translates into jobsite safety, cleanliness, efficiency, and most importantly quality.

By providing exceptional work and showcasing our craftsmanship, we have solidified our name and reputation in the Twin Cities and surrounding communities. We are confident that we offer the highest quality product in the chimney restoration industry.

Check out some of the work we have done over the past five decades.

This is just a small sampling of over 10,000 projects completed since 1970.

“We would like to thank your company for your timely and excellent work. We are extremely pleased with the repair work your crew provided. In addition the crew was friendly, professional, and answered any and all questions."

"I would like to thank you and your company for the chimney repair project carried out at our house. My husband and I are both ecstatic with the workmanship and details put in this job. We will definitely recommend your company to family and friends."